The Stiebel Eltron WPL 20 A is a compact air/water heat pump for outdoor installation with a three-phase connection (3/N/PE~400 V). It uses ambient air as a heat source and reliably delivers heating warmth up to a maximum flow temperature of 65 °C – even at low outdoor temperatures down to -20 °C.With a heating capacity of 7.8 kW at 7/35 °C and a power consumption of only 2 kW, it is designed for use in single and multi-family homes as well as small commercial units. The high energy efficiency class A+++ (W35) ensures low operating costs and economical continuous operation.Technical DataGeneral Data Designation: Heat Pump Product Type / Model Number: WPL 20 A Article Group: Heat Pumps Version: Outdoor Unit Manufacturer: Stiebel Eltron Heat Source: Ambient Air Refrigerant: R410A Weight: 175 kg Protection Class IP: Other Electrical Data Supply Voltage: 230/400 V Connection Voltage: 400 V Electrical Connection: 3/N/PE~400 V Number of Phases: 3 Power Consumption: 2 kW Starting Current: 4.0 A Performance Data / Operation Heating Capacity A2/W35, B0/W35, W10/W35: 6.7 kW Heating Capacity at 7/35 °C according to EN 14511: 7.8 kW Max. Flow Temperature: 65 °C Lower Operating Limit Heating Mode: -20 °C Upper Operating Limit Heating Mode: 40 °C Heat Source Operating Limit: -20 to 40 °C Heating Water Temperature Spread: 5 K Defrosting Method: Reversing Cycle Hydraulic and Air Data Volume Flow Heat Source Side: 4000 m³/h Airflow Rate: 3000 – 4000 m³/h Volume Flow Heating Side: 1.1 m³/h Acoustics Sound Power Level: 56.0 dB(A) Operating Noise: 55.0 dB(A) Energy Efficiency Energy Efficiency Class (General): A++ Energy Efficiency Class (W35): A+++ Energy Efficiency Class (W55): A++ Dimensions Width: 1490 mm Height: 1045 mm Depth: 593 mm Air Operating RangeAir Temperature Range: -20.0 to 40.0 °CCE Conformity (Summary)The WPL 20 A device from the manufacturer Stiebel Eltron is an electrically operated air/water heat pump outdoor unit. It is intended for use in the European internal market and is manufactured in compliance with CE standards according to the manufacturer's specifications.The heat pump fulfills the relevant European directives and standards for safety, electrical engineering, and EMC (e.g., low voltage and EMC requirements).The complete EC/EU Declaration of Conformity is usually provided by the manufacturer Stiebel Eltron upon request or in the technical appendix and should be enclosed with the project or plant documentation.Technical Drawing (Dimensioned Sketch – Description)For planning and installation documents, the heat pump can be dimensioned as follows: Front View: Device Width: 1490 mm Device Height: 1045 mm Side View: Device Depth: 593 mm Recommendation for planning: Ensure sufficient air supply and exhaust corresponding to an airflow rate of 3000–4000 m³/h. Maintain minimum side and rear clearances as per manufacturer's specifications (maintenance access, air circulation). Install on a stable, vibration-damping foundation (concrete base / mounting frame) considering the weight of 175 kg. Note on Documents (PDF):For this item, we provide all relevant documents also as PDF. These include the supplement, technical drawing, installation manual, energy label including product data sheet, and the CE Declaration of Conformity. The documents will be sent to you as a PDF via email upon request or after your order.Disclaimer:All technical specifications and documents are based on manufacturer's data and have been compiled with the greatest care. Errors and technical changes are reserved. Only the current documents from the manufacturer and the valid installation and operating instructions are binding. No liability or claims for damages against us can be derived from discrepancies, errors, or incomplete information. We recommend having the product's suitability checked by a specialist planner or installer before planning and execution.Technical DataCE Conformity (Summary)Technical Drawing (Dimensioned Sketch – Description)

Read more less

Outdoor unit: Samsung AE090RXEDGGEU Eco Split outdoor unit, 9.0 kW heating / 8.7 kW cooling 380–415 V / 3 Ph / 50 Hz Refrigerant: R32, filling quantity 1.4 kg COP: 4.81 / EER: 4.12 SCOP 35 °C: 4.45 / SCOP 55 °C: 3.24 Hydro unit with tank: Samsung AE260RNWSGGEU Integrated 260 l domestic hot water tank Dimensions of indoor unit: 1800 x 595 x 700 mm (H x W x D) Net weight of hydro module: 146.0 kg Control: Comfortable touch remote control for regulating heating, cooling and hot water Features & Functions Heat pump type: Split air/water Heating capacity: 9.0 kW Cooling capacity: 8.7 kW Flow temperatures: Heating: 15 °C to 65 °C Cooling: 5 °C to 25 °C Operational reliability: Reliable operation down to -25 °C outside temperature Refrigerant: R32 (more environmentally friendly than R410A, lower GWP) Net weights: Hydro module: 146.0 kg Outdoor unit: 72.0 kg Energy efficiency Energy efficiency class: A++ (system-dependent) SCOP LWT 35 °C: 4.45 SCOP LWT 55 °C: 3.24 This enables low operating costs and efficient year-round operation.Technical data (short overview) System type: Complete air/water split system with integrated 260 l domestic hot water tank Voltage / phases: 380–415 V, 3~ / 50 Hz Heating / Cooling: 9.0 kW / 8.7 kW Refrigerant: R32, pre-filled with 1.4 kg Tank volume: 260 l Indoor unit: 1800 x 595 x 700 mm Weight: 146 kg (indoor), 72 kg (outdoor) CE Conformity & Technical DrawingThe Samsung ClimateHub Split system is produced by the manufacturer Samsung in accordance with the relevant EU directives (e.g. Low Voltage Directive, EMC Directive, Ecodesign) and is marked with the CE mark.The complete EU/CE declaration of conformity as well as the detailed technical drawings (dimensioned drawings) are available via the official Samsung documentation and can be provided as a PDF upon request during the sales process (e.g. for planning by specialist planners and installers).

Read more less

The Vaillant aroSTOR VWL BM 270/5 is a compact hot water heat pump with 265 l storage volume and an integrated additional heat exchanger. It efficiently uses ambient air for hot water preparation, can intelligently cooperate with a PV system, and is ideally suited for operation in modern, energy-conscious buildings thanks to SG-Ready. Due to the refrigerant R290 (very low global warming potential) and energy efficiency class A for hot water preparation, the system is designed for economical, future-proof operation.The Vaillant aroSTOR VWL BM 270/5 is a compact hot water heat pump with 265 l storage volume and an integrated additional heat exchanger. It efficiently uses ambient air for hot water preparation, can intelligently cooperate with a PV system, and is ideally suited for operation in modern, energy-conscious buildings thanks to SG-Ready. Due to the refrigerant R290 (very low global warming potential) and energy efficiency class A for hot water preparation, the system is designed for economical, future-proof operation.Product advantages Hot water temperature in heat pump mode up to 60 °C, with auxiliary heating up to 65 °C Intelligent use of self-generated PV energy Particularly quiet operation Plug-ready connection cable – easy commissioning SG-Ready – prepared for Smart-Grid / energy management Additional heat exchanger for reheating via boiler or solar system Integrated electric auxiliary heater 1.2 kW Simple, clear operation via illuminated display with selection wheel Convenient connection of supply and exhaust air ducts Technical dataPerformance data Heating capacity / electrical power / COP at A7/W55: 1.24 kW / 0.41 kW / COP 3.00 Heating capacity / electrical power / COP at A15/W55: 1.39 kW / 0.39 kW / COP 3.53 Storage & Hydraulics Total storage capacity: 265 l Heat exchanger surface: 0.8 m² Max. operating pressure on hot water side: 6 bar Connection flow/return heating, heat exchanger: R 3/4 Cold water/hot water connection: R 3/4 Storage material: Stainless steel Electrical data Power supply heat pump: 230 V / 50 Hz Electrical power auxiliary heater: 1.2 kW Max. current consumption: 10 A Max. total power consumption: 1,900 W Operating ranges Hot water temperature (min–max, with auxiliary heating): 60–65 °C Heat source temperature (min–max): -7 to +45 °C Heat source connection line (flexible/rigid Ø 160 mm): 10–20 m Air duct size: 160 mm Dimensions & Weight Product dimensions (H x W x D): 1783 x 634 x 634 mm Product weight: 73.5 kg Refrigerant & Environmental Values Refrigerant: R290 Refrigerant charge: 0.15 kg Global Warming Potential (GWP according to EU regulation): 3 CO₂ equivalent: 0.00045 t Energy efficiencyHot water heating energy efficiency class: A(Scale A+ to F, according to manufacturer's specifications)Order No.: 0010026819CE Conformity & Technical DrawingThe Vaillant aroSTOR VWL BM 270/5 is manufactured by Vaillant in accordance with the relevant European directives and is intended for use in the European market. The EU/CE declaration of conformity, detailed technical drawings (dimensioned drawings), as well as the official energy label and product data sheet are provided by Vaillant in the original documents and can be provided as PDF upon request (e.g., for planning, verification, and documentation).

Read more less

the Sleepy Easy Clean Wipes – perfect for quick, thorough cleaning of surfaces at home, in the office, or on the go. Strong cleaning power with gentle care 100 wipes per pack – particularly economical Ideal for kitchen, bathroom, car, keyboard & more Fresh scent & antibacterial effectResealable packaging for long-lasting freshness Whether for daily use at home or as a hygienic solution on the go – these cleaning wipes are your reliable companion!

Read more less